Filter
Top Products
5
Model 480i SIP Admin Guide
480i IP Phone Set up
The Aastra 480i Web Client
To access the Aastra 480i Web Client, open your web browser (supports
Internet Explorer and Gecko engine based browsers like Firefox, Mozilla or
Netscape) and enter the phone’s IP address into the address Þeld, starting
with the web preÞx “http://”.
In the side menu of the Aastra 480i
Web Client, there are three main
categories: Status, User and Admin.
• The STATUS category contains
read only status information for
sub-categories Network, Hard-
ware and Firmware.
• The USER category contains user
conÞgurable sub-categories Reset
and Password. This section is
accessed through the user level
or the administrator level user
name and password. For more
information, refer to the Aastra
SIP 480i IP Phone User Guide.
• The ADMIN category contains
administrator only conÞgurable
sub-categories: Network,
Firmware and SIP Settings. This
section is accessed through the
admin level user name and
password. You will be prompted
for this information when one
of these options is selected.
For more information, refer to
the section “480i IP Phone Con-
Þguration” of this document
The default for the administrator
user name is “admin” and the
password is “22222”. For a user,
the default user name is “user” and
the password Þeld is left blank.
The user level password can be
changed using the web client.