Filter
Top Products
Model 480i SIP Admin Guide 18
Setting Parameters – Softkey Settings
Setting Parameters – Softkey Settings
This section contains the softkey parameters that can be conÞgured
on the 480i phone. There are eighteen softkeys that can be conÞgured.
These parameters can be conÞgured either from the Aastra.cfg or
the <mac>.cfg Þle. Softkeys can be conÞgured as either speed dials or
as additional call/line appearances.
Parameter –
softkeyN type
ConÞgurable through the conÞguration
Þles only
Description The type of soft key that will be
conÞgured to.
Format Text
Default Value Not Applicable
Range line or speeddial. N in the softkeyN type ranges
from 1 to 18
Example softkey1 type: line
softkey2 type: speeddial
Parameter –
softkeyN label
ConÞgurable through the conÞguration
Þles only
Description The text label that should be displayed for
the soft key. If the soft key is of line type an
icon appears beside the soft key that
indicates the status of the line that this soft
key is conÞgured to.
Format Text
Default Value Not Applicable
Range Sequence of ascii characters. A width less
than 11 characters for line softkey type and a
width less than 9 for the speeddial softkey
type is suggested. N in the softkeyN label
ranges from 1 to 18
Example softkey1 label: “Line 9”
softkey2 label: “info”