Filter
Top Products
Model 480i SIP Admin Guide 32
Appendix B: Sample Configuration Files
# Network Settings
# ================
#ip: # This value is unique to each phone on a server
# and should be set in the “<mac>.cfg” Þle if
# setting this manually.
#----------------------------------------------------------------------
# Line Settings
# =============
# Lines should be set in the <mac>.cfg Þle since these settings
# are unique to each phone.
# Notes: Setting parameters for lines 1 - 4 conÞgures the 4
# line/call appearance hard keys on the 480i. Setting parameters
# for lines 5 - 9 conÞgures the phone for additional line/call
# appearances that can be set up as softkeys.
# The maximum number of line/call appearances that can be
# conÞgured on the 480i is 8 or 9, depending on how the lines
# have been conÞgured.
# If all line/call appearances have been set up for the same
# number, a total of 9 lines can be conÞgured. If all line/call
# appearances have been set up between two different numbers, a
# total of 8 lines can be conÞgured. This means that when all
# line/call appearances are in use, 1 is connected while the rest
# are held. No further outgoing or incoming calls can be made until
# one of the line/call appearances becomes available.
Continued...