Aastra Telecom 9480i Telephone User Manual


 
New Features in Release 2.3
24 RN-001029-02, Release 2.3, Rev 00
IP Phone Release Notes 2.3
Certificate Validation
Certificate validation is enabled by default. Validation occurs by checking that the certificates
are well formed and signed by one of the certificates in the trusted certificate set. It then checks
the expiration date on the certificate, and finally, compares the name in the certificate with the
address for which it was connected.
If any of these validation steps fail, the connection is rejected. Certificate validation is controlled
by three parameters which you can configure via the configuration files, the IP Phone UI, or the
Aastra Web UI:
https validate certificates - Enables/disables validation
https validate hostname - Enables/disables the checking of the certificate commonName
against the server name.
https validate expires - Enables/disables the checking of the expiration date on the
certificate.
User Interface
Certificate Rejection
When the phone rejects a certificate, it displays, "Bad Certificate" on the LCD.
Configuring HTTPS Server Certificate Validation via the Configuration Files
Use the following parameters to configure HTTPS server certificate validation for the IP Phones
using the configuration files.
Parameter
https validate certificates
Validate Certificates
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
IP Phone UI Options->Administrator Menu->
Configuration Server->HTTPS Settings->
Cert Validation->Enable
Aastra Web UI Advanced Settings->Network->HTTPS Settings
Description Enables or disables the HTTPS validation of certificates on the phone.
When this parameter is set to 1, the HTTPS client performs validation on
SSL certificates before accepting them.
Note: If you are using HTTPS as a configuration method, and use a self
signed certificate, you must set this parameter to “0” (disabled) before
upgrading to Release 2.3 of the IP Phones.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example https validate certificates: 0