Filter
Top Products
24
Memory keys
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key
to activate or deactivate the feature.
The active feature applies only to the line you selected or to the prime line if you did
not press a line key. For example, if you want to forward all incoming calls, you must
turn the feature on for each line.
Note: If the Live dial pad option is turned on, you do not have to lift the handset or
press any other button. Pressing the memory key will automatically dial the
feature code and put the telephone in Handsfree mode.
Saving a feature and light in memory keys
You can make the set indicator light come on when you turn a feature on and go off
when you turn that same feature off. You can only do this with one feature, and the
feature must have separate On and Off codes (such as Call Forwarding).
For example, you may want the light to remind you that you have turned Call For-
warding on. To do this, use one key to turn the indicator light on when you activate
the feature. Use the second key to turn the indicator light off when you deactivate that
same feature. The following procedure shows you how to program a FeatureLight On
and Off key.
3. Enter the telephone company fea-
ture code for turning the feature on.
†
3. Enter the telephone company fea-
ture code for turning the feature off.
†
Read the display to conÞrm the number. Read the display to conÞrm the number.
4. Press K. 4. Press K.
5. Enter the feature name using the dial
pad. (See
Entering Names on
page 16.)
5. Enter the feature name using the dial
pad. (See Entering Names on
page 16.)
6. Press K. 6. Press K.
7. Label the memory key. 7. Label the memory key.
†
Note: Contact your telephone company for the appropriate feature codes.
To turn a feature on or off:
1. Press the memory key where you stored the desired feature. The display shows
the feature name and code.
2. Lift the handset or press either D, P or Y.
The feature code is dialed out, which turns the feature on or off.
To save a FeatureLight On key: To save a FeatureLight Off key:
1. Press K. 1. Press K.
2. Do NOT select a memory key yet.
To program the light on, press
⁄.
2. Do NOT select a memory key yet.
To program the light off, press ‚.
3. Press the desired memory key. 3. Press the desired memory key.
To save a Feature On code: To save a Feature Off code:
9120 E UG.book Page 24 Thursday, November 6, 2003 1:45 PM