Filter
Top Products
7
Basic Installation
8. Insert the number card on your
telephone
9. Insert the Memory key card on your telephone
Write your telephone number on
the number card.
Place the number card into the
slot underneath the handset cra-
dle on the on the telephone.
Gently bend the clear plastic lens
and place it on top of the number
card in the slot.
This card contains the feature names for the dedi-
cated keys and label identiÞcation spaces for the
eight programmable memory keys.
Place the card into the memory key card slot on
the telephone.
Gently bend the clear plastic lens and place it on
top of the memory key card in the slot.
For more information on programming memory
keys, refer to
Memory keys
on page 17
To avoid potential electrical shock hazard to personnel or damage
to the telephone, use
only
the manufacturer-supplied equipment
and installation procedures. SpeciÞcally, use only 4 conductor
modular teledapt plug/cords with this product, and an AC trans-
former that is CSA/UL or CSA-NRTL/C approved Class 2 level
C, rated as follows:
For North American Markets AC voltage 110-120V,
Input: 120VAC,
60Hz, 10W and Output: 9V DC, 300mA.
Substitution of non-approved equipment will void the Aastra
Telecom Inc., warranty. For more information about installation
and safety concerns, call 1-800-574-1611.
9116 E UG.fm Page 7 Thursday, April 17, 2003 4:16 PM