Filter
Top Products
9
Making and Answering Calls
Muting a handsfree call
You can turn off the microphone so that the caller can’t hear you but you can still hear
the caller. Muting a call only works when you are in Handsfree mode.
Using Redial
Pressing Redial displays the last number dialed. When you press C the last
number you called appears on the screen.
Call Waiting ID
†
The 9116 is capable of displaying Caller ID information of a second incoming call
while you have a call in progress. When you are on a call and you hear the Call Wait-
ing tone, the Call Waiting information is displayed as shown below.
If you decide you want to speak to the new caller, simply press B. Your Þrst call
will not be disconnected. You may switch between callers as often as you like by press-
ing B. When you press B and see a caller’s IdentiÞcation information but
only hear a dial tone, it means that the caller has hung up. Your second call will be
stored in the Callers List even if it is not answered. For more information about stored
calls, see
Callers List on page 15.
To mute a handsfree call:
1. Press Q.
2. Without lifting the handset, make a call.
3. To turn off the microphone, press Q. You can hear your caller but your
caller cannot hear you. The light beside Q ßashes.
4. To speak to your caller, press Q again. Each time you press Q, you
turn the microphone on or off.
5. When the call is over, press N.
To make a call using Redial:
1. Press C. The display shows the last number you dialed.
2. Lift the handset or press either Dor Q .
†
You must subscribe to your telephone company for the Call Waiting with Calling ID service.
Incoming caller's information
(Caller One) is displayed.
CALLER ONE
555-1234
CALLER ONE
555-1234
When you hear the Call Waiting tone,
Caller Two's information is displayed.
CALLER ONE
555-1234
CALLER TWO
555-5678
9116 E UG.fm Page 9 Thursday, April 17, 2003 4:16 PM