Filter
Top Products
Changes in 1.4.2, Build 1081
RN-001033-00, Rev 01, Release 1.4.2 7
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
DEF04481 Added an additional VLAN mode which enables the phone to be on a VLAN. All
untagged packets are sent to the passthrough port.
To enable this mode, you enable tagging on the phone port as normal, but set the
passthrough VLAN ID to 4095,.
For example, the following configures the phone to be on VLAN 3 but the
passthrough port is configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
DEF04929 When there is an active call, the speeddial keys now send DTMF digits through the
active voice path. To dial out, you now have to first put the active call on hold and
press the speeddial key.
DEF05224 The “Action URI Registered” is now executed on the first successful registration of
each unique line configured on the phone.
DEF05722 Increased the length of the stuttered dial tone used to indicate message waiting.
DEF05964 Usernames containing dots (“.”) are now supported.
DEF06238 VLAN: The SIP and RTP DSCP default values are now set according to RFC4504.
Issue Number Description of Fix
Parameter Old Default New Default
tos sip 26 24
tos rtp 46 32