Filter
Top Products
8
Making and Answering Calls
Making and Answering Calls
Making a call
With your telephone you can make and answer calls using your handset or c
for speakerphone capabilities.
Answering a Call
Using the Hold Key
Note:
The 9110 automatically releases a call on hold when a person on an
extension telephone on the same line picks up the call. If you don’t hang up
the handset after you have put a call on hold and that call is picked up by
someone at another extension, the call is taken off hold but remains connected
to your telephone. If this happens, any background noise from your area will
be heard by the caller and the person at the other extension.
Making a Handsfree call
You don’t have to use the handset to use your telephone. Instead, you can use Handsfree
mode to place a call, or you can switch to Handsfree mode while a call is in progress.
Note:
After ending a handsfree call, you may Þnd you must wait for at least
2 seconds prior to pressing
c
to obtain dial tone and initiating your next
call. This time is required to allow the network to completely disconnect
your last call.
To make a regular call:
1. Lift the handset or press c
.
2. Enter the number using the dial pad.
To answer a call:
1. Lift the handset or press c
.
To put a call on hold and take a call off hold:
1. Make or answer a call.
2. Press
O
.
The set indicator light will ßash quickly to indicate there is a call on hold.
3. To retrieve the call, press O
or c
. If you don’t retrieve the call within
15 minutes, the call is automatically dropped.
To dial without picking up the handset: To switch to a Handsfree call:
1. Press c
. 1. Lift the handset.
2. Dial a number using the dial pad.
2. Dial a number using the dial pad.
3. When the call is over, press
N
. 3. To switch to handsfree,
press
c
.
4. Hang up the handset.
5. When the call is over, press N
.
9110 2 EF.book Page 8 Monday, March 29, 2004 3:51 PM