Filter
Top Products
11
Memory keys
Making calls from memory keys
Deleting memory keys
Saving features in memory keys
For easy access, you can save the feature codes of telephone company services in
your memory keys. This works well with network features such as Call Forwarding
and Call Return. Some features require an On and Off code in two separate keys,
while other features are stored on only one key. The following procedures show you
how to save both an On and Off code.
Note: In some operating environments, these steps must be completed within 20
seconds or the line will brießy disconnect. The telephone will not store digits
to memory if this occurs and you will have to repeat the steps above to
save to a memory key.
†
Contact your telephone company for the appropriate feature codes. Some may require
subscription to Custom Calling Features.
To call from a memory key:
1. Lift the handset or press
c.
2. Press the memory key to obtain the number you wish to dial.
To delete a memory key:
1. Lift the handset or press
c (the dial tone signal will continue
while you delete).
2. Press
K. You will hear two tones.
3. Press the desired memory key you wish to delete. You will hear
a different tone sound.
4. Press
K. You will hear two tones.
5. Hang up the handset or press
c.
To save a Feature On code: To save a Feature Off code:
1. Lift the handset or press
c
(the dial tone signal will continue
while you save).
1. Lift the handset or press c
(the dial tone signal will continue
while you save).
2. Press
K. You will hear two tones. 2. Press K. You will hear two tones.
3. Press the desired memory key you
wish to store the feature code to.
You will hear one tone.
3. Press the desired memory key you
wish to store the feature code to.
You will hear one tone.
4. Enter the telephone company
feature code for turning the
feature on.
†
4. Enter the telephone company
feature code for turning the
feature off.
†
5. Press K to save the feature code
into the memory key. You will hear
two tones.
5. Press K to save the feature code
into the memory key. You will hear
two tones.
6. Hang up the handset or press c. 6. Hang up the handset or press c.
7. Label the memory key. 7. Label the memory key.
9110 2 EF.book Page 11 Monday, March 29, 2004 3:51 PM