Filter
Top Products
5
Basic Installation
Basic Installation
1. Connect the Handset Cord 2.Connect the Line Cord
Attach one end of the coiled handset
cord to the handset and the other end to
the handset port on the back of
the telephone.
Route the handset cord along the groove
leading off the side of the telephone as
shown in the illustration.
Plug one end of the telephone cord into
on the back of the telephone and the
other end to the phone jack.
3. Attach the Stand for Desk Use
If you plan to mount the telephone on the wall, you do not need to attach the stand.
Lower the stand as shown below into the
slots on the back of the telephone.
Slide the stand in the direction shown
below until it clicks into the locked position.
1
9110 2 EF.book Page 5 Monday, March 29, 2004 3:51 PM