Filter
Top Products
224 Model 6757i CT IP Phone User Guide
Accessing Options on the Cordless Handset
Hold v Key
• Press the hold key v
while on a call to place the call on hold. While a call is on hold, and
if there are no other active calls, the LED flashes at the hold rate and the display presents the
Call is on Hold prompt. In addition, a held call reminder tone is played in the form of a short
ring burst (flash ring).
Release Key ( y)
The release key is a multi-purpose key with the following uses:
• To end a call.
• To silent the ringing during an incoming call.
• To exit feature such as Menu (options), Directory, Callers, Redial, Predial.
Mute Key (
æ)
Use the mute key when you want to be able to hear a caller but have them not hear you. Press the
æ
key to mute the handset. Press the
æ
key again to disengage mute. The "Microphone Mute"
prompt displays when mute is activated.
Redial Key (
ß)
The Redial key displays a list of the last 10 calls made from the handset. Use the Ï and  to
scroll through the list.
Feature Key List (
Ï)
The 6757i CT cordless handset supports a programmable feature key list for easy access to
common features. The available features include line keys (1-9), intercom, directory, callers list,
transfer, conference, and public/private call mode. For more information about the feature keys,
see “Feature Keys on the Handset” on page 219.
Note: The handset is equipped with an auto-hold feature. While on an active call,
pressing any other line key results in the current line being placed on hold and the
new line being seized.
Note: You can also place the handset in the charger cradle to end the call.
Note: Pressing this key in a feature does not terminate an active call.