Filter
Top Products
Operational Features
41-001129-00 Rev 09, Release 1.4.1 5-77
Operational Features
Operational Features
You can use any spreadsheet application to open the file for viewing. The
following is an example of a Directory List in a spreadsheet application.
The file displays the name, phone number, and line number for each Directory
entry.
Enabling/Disabling Directory List
You can enable and disable user access to the Directory List on the IP phones
using the following parameter in the configuration files:
• directory disabled
Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter
is set to 0, the Directory List can be accessed by all users. If this parameter is set
to 1, the Directory List does not display on the IP phone and the Directory key is
disabled. On the 480i and 480i CT the "Directory" option is also removed from
the "Services" menu.
Use the following procedures to enable/disable the Directory List on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the Directory List, see
Appendix A, the section, “Directory Settings” on page A-63.