Filter
Top Products
Operational Features
5-64 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
The following table shows the IP phone model and the number of lines for which
you can configure call forwarding.
Enabling/Disabling the Ability to Configure Call Forwarding
Using the configuration files, you can enable or disable the ability to configure
Call Forwarding in the Aastra Web UI and the IP Phone UI. You use the following
parameter to enable/disable this feature:
• call forward disabled
Valid values for this parameter are 0 (disabled) and 1 (enabled). If this parameter
is set to 0, a user and administrator can configure Call Fowarding via the Aastra
Web UI and the IP Phone UI using the "Call Foward" options. If this parameter is
set to 1, all "Call Forward" options are removed from the Aastra Web UI and the
IP Phone UI, preventing the ability to configure Call Fowarding.
Use the following procedures to enable/disable Call Forwarding on the IP phones.
IP Phone Model
Available Lines for
Call Forwarding
480i 9
480i CT 9
9112i 1
9133i 9
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling Call Forwarding, see
Appendix A, the section, “Call Forward Settings” on page A-64.