Aastra Telecom 480i Telephone User Manual


 
M
M
Chapter 1, Introduction
2 Aastra – 2711-001
Full-duplex speakerphone for hands-free.
Built-in-two-port, 10/100 Ethernet switch which lets you share a connection with
your computer.
Inline power support, which eliminates power adapters.
General Requirements
A SIP-based IP PBX system or network installed and running with a number created
for the new 480i IP phone.
Adherence to SIP standard RFC 3261.
Access to a configuration server where you can store the firmware image and
configuration files. The configuration server must be able to accept connections
anonymously.
The IP phone must be configured for a specific type of protocol to use. (TFTP is
enabled by default). You can configure the following protocols on the IP phone:
TFTP (Trivial File Transfer Protocol).
FTP (File Transfer Protocol).
HTTP (Hypertext Transfer Protocol).
A 802.3 Ethernet/Fast Ethernet LAN.
Category 5/5e straight through cabling.
Power over Ethernet (PoE) power supply (optional accessory – necessary only if no
inline power is provided on the network).