Aastra Telecom 392 Conference Phone User Manual


 
Model 392 User Guide
8
Making and Answering Calls
Making and Answering
Calls
Line Selection
The Model 392 telephone offers a
variety of methods to place calls. In
most "one touch" dialing modes,
Line 1 will be automatically selected
for placing calls. If Line 1 is already
in use, the phone will select Line 2
to place the outgoing call. If both
lines are in use, or if either line is on
hold, the display indicates Select a
Line. Pressing v or w
will connect you to that line.
Making Calls
1. Lift the handset or press
g or select vor
w.
2. Dial the phone number using
the keypad.
Hint: To end calls press kor
put handset back in cradle.
Answering Calls
The display shows the icon 9 or h to
indicate which line an incoming call
is on. In addition, the light next to
the appropriate line key will flash.
1. Lift the handset or press
g or select vor
w.
Predialing a number
Predialing allows you to check and
modify a phone number before it is
dialed out.
1. Enter the number using the
keypad. Use the Backspace
softkey or 3 to correct errors
before dialing.
2. Lift the handset or press
g or select vor
w.
Handsfree Speaker and Mute
The Handsfree speaker lets you talk
to callers using a built-in microphone
instead of the handset. When you are
on a handsfree call, you can mute the
caller so they cannot hear you.
Activating Handsfree
1. Make or receive a call by pressing
g, vor w.
The Handsfree indicator and the
line indicator will light.
2. To end a call, press k.
Activating Mute
While on a handsfree call:
1. Press g to mute caller.
The display shows Microphone
muted and the mute indicator
will flash.
2. To speak with caller, press
g again.
3. To end call, press k.
Hint: If you begin a call using the
handset, simply press g
and return the handset to the
cradle to switch to a handsfree
call. To return to the handset,
pickup the handset.
Switching Between Two Lines
1. Make or answer call on one line.
2. Press the other line key and
make or answer a second call.
The first call will automatically
be placed on hold.
3. To hold one line and speak on
the other line, press the line
keys alternately.
4. To end a call that is not on hold,
press k.
Timing a call
When you make or answer a call, the
Display timer shows the elapsed time of
the call.
E 392.book Page 8 Wednesday, June 19, 2002 2:39 AM