Filter
Top Products
32
The display is blank.
Your telephone provides basic
telephone service during a power
failure. You can use the dial pad and
receive calls, but the other keys and
the display do not work until power
returns.
The time and date are wrong.
If the power has been out, the next
incoming call will reset the time and
date. (You must subscribe to calling
line identification service.) To
manually reset the time and date, press
¥
,
, and follow the
instructions on the display.
The ringer sounds different.
When a call comes in from a private
name or number, the ringer uses a
special tone.
Numbers don’t show on the
display.
If you dial using the Directory, Callers
List, or Redial, numbers you press on
the dial pad will not appear on the
display. (This keeps passwords from
appearing on the display.) If you dial
using the dial pad, every number you
press will appear.
The Redial list shows more
than the number you dialed.
If you dial using the dial pad, the
Redial list stores all digits you dial,
even those you dial after the call
connects. If you want just the number
to be stored, dial using the Directory or
Callers List.
My voice mail password shows
up in the Redial list.
If you dial your voice mail number
using the dial pad, all digits you dial,
including your password, are stored in
the Redial list. Delete the number in
your Redial list.
To keep your voice mail password a
secret, program the telephone number
for your voice mail service into the
Directory. Do not program your
password. Then, always dial the voice
mail number using the Directory.
When you dial your password, it won’t
show up in the Redial list.
What is a softkey?
There are three keys on the left and
right side of the display. They do
different things, depending on the
label next to them on the display.