Filter
Top Products
31
Helpful hints
Callers are not identified on
the display.
Let the telephone ring at least twice
before answering. Make sure you
subscribe to calling line identification
services from your local telephone
company.
The display is blank and
ringer volume is very low.
Make sure the power adaptor is
plugged in a working electrical outlet.
You cannot dial a number in
the Callers List.
If the number of the caller is unknown,
you cannot return the call.
Or, the number may require an area
code. Press the
softkey to
edit the number, then press the
softkey.
You cannot hear a caller or be
heard.
Increase the receiver or speaker
volume. Make sure the handset cord is
inserted securely into the jack. If the
Handsfree light is flashing, the call is
muted: press the Handsfree key.
The telephone wobbles.
Make sure the cords are routed
properly through the stand, as
indicated in the Installation section.
Check that the stand has been properly
snapped in.
The display works but you
can't hear a dial tone.
Make sure the line cord is connected in
the appropriate jack. If the problem
persists, have your wall jack checked:
the wiring may need to be repaired.
The cursor doesn't move when
you're adding to the
Directory.
The name or number may be too long.
Names can be no longer than 16
characters and numbers can be no
longer than 24 characters.
The display is in the alternate
language.
You can change to the other language
by pressing
¥
,
, and the
appropriate softkey.
You cannot place a call.
This telephone requires tone service.