Filter
Top Products
Networking Setup Guide 21
EtherTalk Configuration
Changing the Printer’s EtherTalk Zone (Optional)
Using PostScript utility files.
See the ReadMe files on the printer’s CD-ROM. The Macintosh ReadMe file is in the
Network Utilities folder; the PC ReadMe file is in the UTILS directory.
Using CentreWare IS
1. Connect to the printer via CentreWare IS (see page 23).
2. From the main CentreWare IS page, click Properties.
3. In the Protocols group on the left side of the screen, click EtherTalk.
4. In the Zone field, type the desired zone, then click Save Changes at the bottom of the
page.