8. Help
53
3 Clean the document separation roller (1)
with a cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
4 Hold the centre part of the front cover (1),
and pull open the inner cover (2).
L Do not touch the transfer roller (3).
5 Clean the document feeder roller (1) with a
cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
Clean the upper glass (2) with a soft and dry
cloth.
6 Push back the inner cover.
7 Remove the drum and toner unit (1) by
holding the two tabs.
8 Clean the lower glass (1) with a soft and dry
cloth.
9 Reinstall the drum and toner unit (1) by
holding the tabs.
Caution:
The fuser unit (3) gets hot. Do not
touch it.
1
1
3
2
2
1
1
1
1
FL511AL.book Page 53 Tuesday, October 7, 2003 2:18 PM
