A SERVICE OF

logo

12 - 28
MELSEC-Q
12 CONTROL SUB FUNCTIONS
The following table shows the "
Md.35
Torque limit stored value" of the
buffer memory address.
Buffer memory address
Monitor item
Monitor
value
Storage details
Axis
1
Axis
2
Axis
3
Axis
4
Md.35
Torque limit stored
value
The "torque limit value" valid at that time is
stored. (
Pr.17
,
Pr.54
,
Cd.22
, or
Cd.101
)
826 926 1026 1126
Refer to Section 5.6 "List of monitor data" for information on the setting details.
REMARK
Parameters are set for each axis.
It is recommended that the parameters be set whenever possible with GX
Configurator-QP. Execution by PLC program uses many PLC programs and
devices. The execution becomes complicated, and the scan times will increase.