Filter
Top Products
P-2000W_V2 Quick Start Guide
8
3.1 Fixed IP
With this option you have to manually enter an IP address, subnet mask and gateway IP address. These are
given to you by the network administrator.
2 Use the down arrow key to scroll to Net Settings and press the Left key).
5. SIP Settings
6. Settings
Select Back
3 Scroll to Network Mode and press the OK key.
If you were given an IP address and subnet mask, go to Section 3.1.
If you were given a user name and password for Internet access, go to Section
3.2.
2. IP Address
3. Subnet Mask
Select Back
1 Use the down arrow key to scroll to Fixed IP and press the OK key.
[2] DHCP
[3] PPPoE
Select Back
2 Scroll to IP Address and press the OK key.
3. Subnet Mask
4. Gateway
Select Back
3 Use the keypad to enter your IP address. Use the Power/End key to clear the
default text and remove typos. Press the OK key when you are done.
IP Address
192.168.1.71
Ok Aa @ Clear
4 Scroll to Subnet Mask and press the OK key.
4. Gateway
1. Network Mode
Select Back
4. Net Settings
1. Network Mode
[1] Fixed IP
2. IP Address
1
3. Subnet Mask