Filter
Top Products
P-2000W_V2 User’s Guide
Chapter 4 Network Settings 43
4.3 PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) functions like a dial-up connection. You need a
user name (PPPoE name) and password from your ISP.
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select DHCP.
[3] PPPoE
[1] Fixed IP
Select Back
1. Network Mode
[2] DHCP
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select PPPoE.
[1] Fixed IP
[2] DHCP
Select Back
4 Select PPPoE Name.
3. PPPoE Pwd
1. Network Mode
Select Back
5 Use the left arrow button to clear the PPPoE name. Use the up
and down arrows to select the type of characters. Enter your
PPPoE name. Use the Left key to select Ok when you are done.
PPPoE Name
pppoe_username
Ok Aa1@ Clear
4. Net Settings
1. Network Mode
[3] PPPoE
2. PPPoE Name
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030