Yamaha 4TX-AE3 Two-Way Radio User Manual


 
–7–
11 A.C. magneto lead
12 Air filter case breather hose
13 Carburetor heater hose
14 Starter cable 2
15 Thermo switch lead
16 Brake hose
17 Speed sensor lead
18 Wire harness
19 Flasher relay lead
20 Fuel pump lead
A Fasten the left handlebar switch
lead and main switch lead with a
plastic band.
B Route the wireharness to the rear-
side of the frame pipe.
C Route the starter cable through ra-
diator hose upward and spark plug
lead rear side and in front of air fil-
ter case breather hose. Route the
spark plug lead to the outside of
the carburetor starter bracket and
carburetor heater hose.
1 Front flasher light (left) lead
2 Main switch lead
3 Starter cable 1
4 Left handlebar switch lead
5 Spark plug lead
6 Carburetor breather hose
7 Fuel hose
8 Coolant reservoir hose
9 Sidestand switch lead
10 Neutral switch lead
CABLE ROUTING
SPEC