Filter
Top Products
www.vtechphones.com
8
GETTING STARTED
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the rst incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press
or
until DATE/TIME is displayed. Press SELECT.
• The month is ashing. Press
or
until the screen displays the correct month. Press SELECT.
• The day is ashing. Press
or
until the screen displays the correct day. Press SELECT.
• The hour is ashing. Press
or
until the screen displays the correct hour. Press SELECT.
• The minute is ashing. Press
or
until the screen displays the correct minute. Press SELECT.
• AM or PM is ashing. Press
or
to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
• With the handset in idle (off) mode, press PROG.
• Press
or
until the screen displays RINGER: and the current setting.
• Press SELECT. The current setting blinks, and you will hear a sample of the ring.
• Press
or
to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
• Press SELECT.
• In the event of a
power outage, or if
your phone’s power
cord is unplugged,
the time setting will
be lost.
To single telephone
jack (RJ11C)
Telephone line cord
Noise lter
(For xDSL users)
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren’t functioning properly, install a
noise lter to the telephone line between the base unit
and the telephone line jack. Contact your DSL provider
to obtain a noise lter.