Filter
Top Products
www.vtechphones.com
29
Additional Information
ADDITIONAL INFO
Troubleshooting
Problem Suggestion
Common cure for
electronic equipment.
If the unit does not seem to be responding normally, then try putting the handset in its base. If it
does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the base.
2. Disconnect the handset battery, and spare battery, if applicable.
3. Wait a few minutes.
4. Connect power to the base.
5. Re-install the battery(ies).
6. Wait for the handset to re-establish its link with the base. To be safe, allow up to one minute
for this to take place.
To single telephone
jack (RJ11C)
Telephone line cord
Noise lter
(For xDSL users)
If you subscribe to DSL service:
If you hear noise during conversations and/or your caller
ID features aren’t functioning properly, install a noise
lter to the telephone line between the base unit and the
telephone line jack. Contact your DSL provider to obtain
a noise lter.