Filter
Top Products
Getting Started
Registration
Your mi 6820 is an accessory handsets for use with the mi 6821, mi 6822, mi 6861, mi
6862 or mi 6872 base units. To register your mi 6820 for the first time:
1. After charging the battery, the screen will display:
2. Press SEL, you will see ENTER BASE ID, if the
screen already says ENTER BASE ID, go to step 3.
6. If the base accepts the new handset, after several
seconds the new handset will show:
where X is the new handset number assigned,
sequentially, by the base.
If you do not enter the correct digit sequence, you will hear an error tone. Press DELETE
key to backspace to erase a character(s) and carefully re-enter the base ID code.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
including 0 through 9 and *. Make sure you enter all 15 digits.
4. Press SEL to complete the registration process.
5. Once a valid base ID code has been entered, the
display will blank for a second or two, and then
show:
7
Re-register Existing Handsets to New Base
1. Install the new mi 6821, mi 6822, mi 6861, mi 6862
or mi 6872 base unit. The handsets will display
SEARCHING…, press and hold the SEL button
for two seconds.
2. The handset will display:
3. Follow steps 3 through 6 in Registration, above.
3.
Enter the 15 digit base unit ID code, located on the
underside of your main base (mi 6821, mi 6822,
mi 6861, mi 6862 or mi 6872). If you make a
mistake, press the DELETE key to backspace
(delete characters), then enter the correct
information.