Filter
Top Products
13
BASIC OPERATIONS
From the Base Unit:
Press the desired LINE key and listen for dial tone. Dial the phone number. The correspond-
ing LINE key on the Handset will blink. Press OFF to end your call.
REDIAL/PAUSE
From the Handset: Your VT 2931 Handset remembers the
last 5 phone numbers you dialed. With the Handset off, press
REDIAL/PAUSE. The Handset will display:
This is the last phone number dialed from the Handset. Press or to scroll through
the previous numbers dialed. Once the desired number is displayed on the Handset, press
the appropriate LINE key to dial.
From the Base Unit: Press REDIAL/PAUSE. The last number dialed from the Base Unit is
displayed. Press the appropriate LINE key to dial.
ANSWERING CALLS
From the Handset:
1.
Press the flashing LINE key. The LINE key will glow steadily
and the Handset will display:
2. The Base Unit will display
HANDSET IN USE,
and the corresponding LlNE key will blink.
3. Press
OFF
to end your call
.
From the Base
:
1. Press the flashing LINE key. The LINE key will glow steadily
and the Base Unit will display:
2. The corresponding LINE key on the Handset will blink while the Speakerphone is in use.
3. Press OFF to end your call.
HANDSET VOLUME
Adjust the Handset volume with the and keys, located on the side
of the Handset.
The Handset will display the relative volume level as you adjust it.
BASE SPEAKERPHONE VOLUME
Adjust the Base Unit volume with the and keys, located to the
right of the dialpad. The Base will display the relative volume level as you
adjust it. The Speakerphone volume can only be adjusted while the Base
Unit is IN USE (in Speakerphone or Intercom mode).
MUTE
1. When you press the MUTE key while using the base speakerphone,
you can hear your party’s voice, but your party can’t hear you.
2. While the call is muted, the MUTE indicator will be lit.
3. To go back to the two-way conversation, press MUTE again.
VOLUME
KEYS
BASIC OPERATIONS