Filter
Top Products
4
www.vtechphones.com
Installation
For maximum performance of your cordless
telephone system:
1. Choose a central location for your base
unit.
2. Install your phone(s) as far away as
possible from any other cordless
(wireless) devices such as cordless
telephones, 802.11 wireless routers (for
example, WiFi), etc.
3. Install your phone(s) as far away
as possible from other electronic
equipment such as microwave ovens,
televisions, computers, etc.
4. Install your telephone equipment away
from heat sources and sunlight.
5. Avoid excessive moisture, dust or
extreme cold.
Install handset battery
a) Align the two holes in the plug with
the socket pins, then snap the plug
into place.
b) Place the battery in the compartment.
c) Replace cover by sliding it up into
place.
d) Place the handset in its base when
not in use to ensure maximum daily
performance.
e) Be sure to charge the battery for a
minimum of 16 hours before using your
phone.
Choose location
• Use only the VTech
battery pack supplied
with your phone.
• Place the handset in
its telephone base
when not in use to
ensure optimum
performance.
CAUTION: To reduce
the risk of re or injury,
read and follow these
instructions:
1. Use only the battery
supplied, or quivalent
2. Do not open or
mutilate the battery
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin It may
be toxic if swallowed
3. Exercise care in
handling battery in
order not to short
the battery with
conducting materials
such as rings,
bracelets, and keys
The battery or
conductor may
overheat and cause
burns.