Filter
Top Products
15
Basic Operation
8. Press SEL or PROG to confirm your selection. If you chose Y, a D will be displayed
with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds,
and you will not be able to store a new number until you delete a stored entry.
Edit a Number/Name Stored in the Directory
1. Press
(DIR). The screen displays DIRECTORY.
2. Press
or to scroll alphabetically through the entries stored in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press SEL. EDIT flashes on
the screen.
4. Press SEL. The screen displays the name and number. The cursor appears at
the end of the name. Use , and the dial pad keys to edit the name. Press
SEL to move on to edit the number. Use to backspace and make correc-
tions. Press SEL to move on to edit the distinctive ring setting.
5. Press SEL to save the edited information.
Delete a Number/Name Stored in the Directory
1. Press (DIR). The screen displays DIRECTORY.
2. Press
or to scroll alphabetically through entries in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press SEL. Then
press
until ERASE flashes.
4. Press SEL. The screen displays ERASE NO YES and the number. The current
choice flashes.
5. Press
until YES flashes.
6. Press SEL. You’ll hear a confirmation beep.
Telephone Directory
SPEED EDIT ERASE
800-595-9511
01
SPEED EDIT ERASE
800-595-9511
01