Filter
Top Products
www.vtechphones.com
4
GETTING STARTED
Installation
For maximum performance of your cordless
telephone system:
1. Choose a central location for your Base
Unit.
2. Install your base unit and extension
handsets away from electronic equip-
ment, such as personal computers,
television sets and microwave ovens.
3. In locations where there are multiple
cordless telephones, separate base
units as much as possible.
4. Install your telephone equipment away
from heat sources and sunlight.
5. Avoid excessive moisture, dust or
extreme cold.
Install Handset Battery
a) Remove battery compartment cover by pressing on the
indentation and sliding downwards.
b) Align the two holes in the plug with the socket pins, then
snap the plug into place.
c) Place the battery in the compartment with the wires in the lower
right corner. Angle the top of the battery under the top claws first,
then snap the bottom of the pack in. Place the wires under the
guide, located below the battery.
d) Replace cover by sliding it up into place.
e) Place the handset in its base when not in use to ensure
maximum daily performance.
• Use only the provided
VTech battery, or
equivalent.
Choose Location