Filter
Top Products
www.vtechphones.com
13
Basic Operation
BASIC OPERATION
You can store telephone numbers you call frequently in two different ways, as speed dial numbers, or in the
directory. Each number can have up to 24 digits. You will program names to go with the numbers, each can have
up to 15 characters.
Up to ten numbers and names can be stored, total. You can store as many as nine numbers with names into
speed dial memory locations you assign (1 through 9). You can also store numbers with names alphabetically in
the directory. See Telephone Directory for instructions.
Store a Number/Name in Speed Dial
1. Press PROG on the handset.
2. Press
or
until the screen displays SPEED DIAL.
3. Press SELECT
The screen displays ENTER 1-9.
4. Press the key (1 through 9) for the memory location where you want to store this entry. The screen displays
ENTER NAME.
5. Using the chart on the next page, enter up to 15 characters for the name you’re storing with the number. Use
to backspace and make corrections; use
to advance and add a space.
6. When you finish entering the name, press SELECT. The screen displays ENTER NUMBER.
7. Enter the telephone number using the number keys. Use
to backspace and make corrections. After at least
one digit has been entered, press REDIAL/PAUSE to store pauses in the dialing sequence, if necessary
.
Press REDIAL/PAUSE to display the last number dialed.
8. Press SELECT to store your entry. The screen displays DISTINCT RING? and the current setting.
9. Press
or
to change the setting. Choose
Y (for yes) if you wish the phone to alert you to calls from
this number by changing to a distinctive ringing pattern after the first ring. Choose N for a normal ringing
pattern.
10.
Press SELECT to confirm your selection. If you chose Y, a D will be displayed with the directory entry.
Speed Dialing
• The entries you
stored in speed
dial memory will
be marked with 01
through 09 in the
telephone directory.
• Press OFF at any
time to exit memory
mode.