Filter
Top Products
8
Telephone settings
Clear voicemail
If you subscribe to voicemail service offered by your telephone company,
NEW VOICEMAIL and appear on the handset, and the VOICEMAIL light
on the telephone base ashes when you have new voicemail messages.
Contact your local telephone company for more information and assistance
about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on both
the handset and telephone base turn off automatically.
Use the clear voicemail feature when the telephone indicates that there is
new voicemail but there is none (for example, when you have accessed your
voicemail while away from home). Clearing the voicemail waiting indicator
only turns off the indicators; it does not delete your voicemail messages. As
long as you have new voicemail messages, your local telephone company
continues to send the signal to turn on the indicators.
To manually turn off these indicators:
Press MENU/SELECT to show the menu when the
handset is not in use.
Press or to select
>
CLR VOICEMAIL, then
press MENU/SELECT. The screen shows TURN OFF
INDICATOR?
Press MENU/SELECT to conrm your selection.
1.
2.
3.
Your telephone service provider might alert you to new messages with a
stutter (broken) dial tone. Contact your service provider for details.
Voicemail is different from answering system messages recorded in your
answering system. For more information about the difference, see page 26.
•
•
>CLR VOICEMAIL
HOME AREA CODE
TURN OFF
INDICATOR?
Home area code
If you dial your local calls using only seven digits (area code not required),
you can program your home area code so that when you
receive a call within your local area, the telephone number
is automatically stored without the area code in the call log.
Press MENU/SELECT to show the menu when the
handset is not in use.
Press or to select
>
HOME AREA CODE, then
press MENU/SELECT. The stored home area code
appears with the last digit ashing.
Use the dialing keys to enter the desired home area code.
Press MUTE/REMOVE to delete a digit.
Press and hold MUTE/REMOVE to delete the entire entry.
Press MENU/SELECT to conrm.
1.
2.
3.
•
•
4.
>HOME AREA CODE
ANS. SYSTEM
HOME AREA CODE
800
If, in the future, your telephone company requires you to dial the area code when
making a local call, delete the home area code you have already programmed
by pressing MUTE/REMOVE. After you have deleted the programmed home area
code, ___ appears.