VTech LS6125-2 Cordless Telephone User Manual


 
www.vtechphones.com
40
Answering system
New message indication
The message display counter will ash when there are new answering system
messages.
If the new message alert tone is turned on, the telephone base will beep every
ten seconds when there are unreviewed messages.
Message playback
Press /PLAY/STOP to listen to messages.
Press /PLAY/STOP again to stop playback.
If you have new messages, you will hear only the new messages (oldest rst). If
there are no new messages, the system will play back all messages (oldest rst).
When playback begins, the total number of messages is announced, followed
by the day and time of the rst message to be played.
Options during playback
Press VOL / to adjust the speaker volume.to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing. Press /REPEAT
twice to listen to the previous message.
Press X/DELETE to delete the current message. The system will advance to
the next message.
1.
2.
If the system
has less than
ve minutes of
recording time left,
the remaining time
will be announced.
If F is ashing
in the message
window, the
memory is full.
You will have
to delete some
messages before
new ones can be
recorded.
Only old
messages can be
deleted. Messages
can only be
deleted after they
are played.