Filter
Top Products
www.vtechphones.com
38
Answering system
Outgoing announcement
The outgoing announcement is the greeting callers hear when calls are answered
by the answering system.
The telephone is preset with a greeting that answers calls with “Hello, please
leave a message after the tone.” You can use this preset announcement, or
replace it with your own. While in the ANNC menu, press ANNC again to exit
at anytime.
Record your own announcement
Press ANNC when the phone is not in use, and the system will announce
“Announcement. Press PLAY or press RECORD.”
Press RECORD and the system announces, “Record after the tone. Press
STOP when you are done.”
After the tone, speak towards the microphone at the bottom front of the
telephone base from about nine inches away.
Press /PLAY/STOP when nished.
The answering system will automatically playback the newly recorded
announcement. Press /PLAY/STOP to stop the playback at anytime.
Press /PLAY/STOP again to replay the recorded announcement. Press
RECORD to record again (follow steps 2 through 4) if desired. Press ANNC
to exit programming mode.
1.
2.
3.
4.
5.
6.
Your
announcement
can be up to 90
seconds in length.
Announcements
shorter than two
seconds will not
be recorded.
•
•