Filter
Top Products
www.vtechphones.com
22
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each
location) into the speed dial memory locations you assign (1 through 9). You can also store telephone
numbers with names alphabetically in the directory. See the Directory section for instructions.
Store a speed dial entry
1. Press PROG on the handset.
2. Press
or
until the screen displays SPEED DIAL.
3. Press SELECT. The screen displays ENTER 1-9.
4. Press the key (1 through 9) for the memory location where you want to store this entry. The screen
displays ENTER NAME.
5. Using the chart below, enter up to 15 characters for the name you’re storing with the number. An
error tone will sound if you try to enter more than 15 characters. Press
then press CHAN/REMOVE
to backspace and make corrections; press
to advance or press it twice to add a space.
• The entries you stored
in speed dial memory
will be marked with
01 through 09 in the
telephone directory.
• Press OFF at any
time to exit speed
dial mode.
• When memory is full
the screen displays
MEMORY FULL, an
error tone sounds,
and you cannot
store a new number
until you delete a
record in speed
dial memory or the
directory.
• If the locations is
not empty, your new
entry will be stored
in place of the old
and the entry will be
moved to a directory
location.
• The entries you
stored in the speed
dial/directory are
independent from
other handset.
Speed dial
Characters by number of key presses
Dial Key Once Twice 3 Times 4 Times 5 Times 6 Times
1
1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
*
*
#
& ‘ , - . #