Filter
Top Products
35
Basic Operations
Base Settings
To access Base Settings, with the Base in the idle (OFF) mode, pressMENU, scroll
down to BASE SETTINGS, then press OK. You can now access the following
setting options:
RINGER VOLUME
RINGER MELODY
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
Press CLEAR at any time to back out of Base Settings mode.
Ringer Volume
To adjust the Base Unit ringer volume:
• Press MENU. Scroll down to BASE
SETTINGS, then press OK. RINGER
VOLUME will be highlighted. Press OK
again. You will see a graph on the Base
display indicating the relative volume set-
ting.
• Press
to lowerthe ringer volume.
At the lowest setting (graph is com-
pletely clear), the Base will not ring
when a call comes in.
• Press
to raise the volume. At the
loudestsetting,thegraphiscompletely
shaded in.
• Press OK to confirm your setting.
Ringer Melody
There are eight Base ringer melody choices. To
change the melody:
• Press MENU. Scroll down to BASE
SETTINGS,then pressOK. Scroll down
to RINGERMELODY.
• Press OK. Use either scroll key to
sample the melodies.
• Press OK to confirm your selection.
Base Soft Menu Functions
i 5886 manualNov11.p65 11/12/2003, 9:51 AM35