Filter
Top Products
28
Create a Ringer
You can easily record a unique ringer to be used as either your Default Ringer or
for a Distinctive Ringer for assigning to a individual phonebook directory. You can
either record using the provided Audio Patch Cord (not the USB cord), or simply
use the Handset microphone. You may record 9 unique ringers for a maximum of 10
seconds each.
To record a ringer, follow these steps.
• Select the Sounds & Alerts icon in the Main Menu.
• Select the Sound Clips icon.
• If you are using the Audio Patch Cord, insert the 3.5mm plug (larger plug) into
the headset jack of your PC or audio source. Insert the 2.5mm plug (smaller
plug) into the Headset jack on the side of the i 5836 Handset.
•
.
• If you want to use the Handset microphone to record ringers, select Record Clip
menu option. Start recording your tone after you hear a beep.
NOTE: If the memory is full, it will prompt Clip memory full!
• Hit the STOP softkey if you want to stop the recording.
•
After the recording is finished, you have the choice to PLAY or SAVE the recording.
NOTE: When you want to use the Handset microphone to record ringers, do not
insert the Audio Patch Cord into the headset jack.
Recordable Ringer
Basic Operation
i 5886 manualNov11.p65 11/12/2003, 9:51 AM28
NOTE: Your i 5836 Handset is preset with many musical (i.e. Jazz, R&B,
Reggae, Rock, etc) ringer options for you to use as your default ringer or a
distinctive ringer for a phonebook directory. Three of them are protected,
you cannot replace them. You can replace the other 6 preset ringers with
your own. Or you can record your own ringers in another 3 blank locations
in
My Clips. You may find 10 additional sound clips on the accompanying
CD-ROM.
You can listen to the playing music through your Handset speaker after
connecting
the Audio Patch Cord when selecting the Record Preview menu
option. Adjust the recording volume at the audio source. When hear what you
desire to record, press RECORD.
If you press
SAVE
to store your recording,
it will prompt Enter Clip Name.
Enter a name up to 8 characters for
the recorded melody. If you make a mistake,
press
the
softkey to backspace.
Press
SAVE
for confirmation. Clip has
been saved will display. The melody will be stored in the My Clips section.
You can listen to all of your recorded musical ringers in My Clips.Ifyou
want, when in My
Clips
,
you can press DELETE then YES to erase one of
them My
Clips.