Filter
Top Products
14
To access a number from the
caller ID log while on a call:
Press MENU.
Press or to highlight Caller ID
log, and then press SELECT.
Press or to scroll to the desired
entry.
Press SELECT to dial the displayed
number.
To access a number from the
redial list while on a call:
Press REDIAL to enter the redial list.
Press , , or REDIAL repeatedly to
browse to the desired entry.
Press SELECT to dial the displayed
number.
Find handset
This feature helps you find misplaced
handsets.
To start the paging tone:
Press /FIND HANDSET on the
telephone base.
All idle handsets ring and their
screens display ** Paging **.
To stop the paging tone:
Press , OFF, or any dialing key
(0-9, , or ) on a handset.
1.
2.
3.
4.
1.
2.
3.
•
•
Transfer a call
While on an outside call, you can
transfer the call from one handset to
another.
During a call, press MENU.
Press or to scroll to Transfer,
then press SELECT.
If you have one handset, your
handset displays Calling base and
then Transferred.
If you have two or more handsets,
your handset displays Transfer to:
Press 7 for the telephone base or
1-5 for HANDSET 1 or
HANDSET 5. Your handset
displays Calling base or Calling
HS X and then Transferred.
The destination device rings and its
screen displays Incoming call.
3. To answer on the destination device,
press , , or any dialing key
(0-9, , or ) on the destination
handset, or press /SPEAKER or
any dialing key (0-9, , or ) on
the telephone base.
NOTES
If the destination device does not answer
the call within 30 seconds, the call will
be reverted to the originating handset. If
you do not press , , or any dialing
key (0-9, , or ) on your handset
to reconnect the outside call within 30
seconds, the call ends automatically.
If the destination device is in the directory
or caller ID log, or is out of range, the
originating handset displays Unable to
call and then reconnects to the outside
call.
1.
2.
•
•
•
•