VTech cs6859-2 Cordless Telephone User Manual


 
52
Answering system settings
Remote access code
A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The preset code
is 19. You can set the code from 00 to 99.
Press MENU when the phone is not in use.
Press /CIDCID or /
to scroll to Answering sys, then
press SELECT.
Press /CIDCID or / to scroll to Ans sys setup, then
press SELECT.
Press /CIDCID or / to scroll to Remote code, then
press SELECT.
Use the dialing keys (0-9) to enter a two-digit number,
or press /CIDCID or / to scroll to a desired two-digit number.
Then press SELECT to conrm your selection. You hear a
conrmation tone.
Message alert tone
When the message alert tone is set to on, and there is at least
one new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
Press /CIDCID or / to scroll to Answering sys, then
press SELECT.
Press /CIDCID or / to scroll to Ans sys setup, then
press SELECT.
Press /CIDCID or / to scroll to Msg alert tone, then
press SELECT.
Press /CIDCID or / to choose Tone: On or Tone: Off, then
press SELECT to conrm your selection. You hear a
conrmation tone.
The answering system must be turned on for the message alert
tone to be functional.
Press any key on the telephone base (except FIND HANDSET)
to temporarily silence the message alert tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans sys setup
ECO
Remote code
ECO
Remote code
19
ECO
Ans sys setup
ECO
Msg alert tone
ECO
Tone: Off
ECO