31
Multiple handset use
Intercom
- OR -
To end the intercom call at the telephone base, press /SPEAKER or INT. Both
devices display Intercom ended.
You can cancel the intercom call before it is answered by pressing OFF or INT.
If the destination device does not answer the intercom call within 100 seconds, is
accessing the answering system, on a call or out of range, the originating handset
displays Unable to call and returns to idle mode.
You can press OFF or MUTE on the destination handset, or CANCEL or MUTE on the
telephone base to temporarily silence the intercom ringer.
You can use four devices on two pairs of intercom calls. For example, when four
devices are used on two pairs of intercom calls, use the fifth device for an outside call.
If there is an incoming call while the originating handset displays Calling HS X or
Calling base, the intercom request will be stopped and the screen displays
Incoming call.
To initiate an intercom call at the telephone base:
Press INT on the telephone base when not in use.
If you have only one handset, the telephone base
displays Calling HS 1.
If you have two or more handsets, the telephone base
displays Intercom to: Press 1-5 for HANDSET 1 to
HANDSET 5. The telephone base displays Calling HS X.
The destination handset rings and its screen displays
Base is calling.
2. To answer the intercom call on the destination handset,
press , , INT or any dialing key (0-9, TONE or
QUIET
#
). Both devices now display Intercom.
3. To end the intercom call at the telephone base, press
/SPEAKER or INT. Both devices display Intercom ended.
- OR -
To end the intercom call on the destination handset, press OFF or place the handset
back in the telephone base or charger. Both devices display Intercom ended.
If you do not have any handset registered to the telephone base, you will hear two
beeps when you press INT on the telephone base.
You can cancel the intercom call before it is answered by pressing CANCEL or INT.
If the destination handset does not answer the intercom call within 100 seconds,
is accessing the answering system, on a call or out of range, the telephone base
displays Unable to call and returns to idle mode.
•
•
•
•
•
1.
•
•
•
•
•
Base is calling
ECO
10:01
AM
11/20
Intercom
MSG #
1
10:01
AM
11/20
Intercom to:
MSG #
1