Filter
Top Products
17
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If you
subscribe to caller ID service, the day, month and time are set automatically with each
incoming call. However, the year must be correct so that the day of the week can be
calculated from the caller ID information.
Press MENU when the handset/telephone base is not in use.
Press /CIDCID or / until the screen displays Set date/time,
then press SELECT.
Press /CIDCID or / to select the month then press SELECT,
or use the dialing keys to enter a two-digit number (01-12).
Press /CIDCID or / to select the date then press SELECT,
or use the dialing keys to enter a two-digit number (01-31).
Press /CIDCID or / to select the year then press SELECT,
or use the dialing keys to enter a two-digit number (00-99) then
press SELECT.
Press /CIDCID or / to select the hour then press SELECT,
or use the dialing keys to enter a two-digit number (01-12).
Press /CIDCID or / to select the minute then press SELECT,
or use the dialing keys to enter a two-digit number (00-59).
Press /CIDCID or / to select AM or PM.
Press SELECT to save the settings. You hear a conrmation tone.
If the date and time are not set when a message is recorded, the system announces,
“Time and date not set,” before each message plays.
The phone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM --
ECO