Filter
Top Products
4
Getting started
Align the cover at against the battery compartment, then slide it
towards the center of the handset until it clicks into place.
3.
Battery installation (continued)
Charge the handset by placing it in the telephone base or charger. The
CHARGE light remains on whenever the handset is charging.
4.
CANCEL
CHARGE
light
If the handset will not be used for a long period of time, disconnect and
remove the battery to prevent any possible leakage.
To purchase a replacement battery, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
•
•
IMPORTANT:
Check for a dial tone by pressing . If you hear a dial tone, the installation
is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone
service to digital service from a cable company or a VoIP service
provider, the telephone line may need to be rewired to allow all existing
telephone jacks to work. Contact your cable/VoIP service provider for
more information.
•
•