VTech CS5123 Telephone User Manual


 
www.vtechphones.com
38
Answering system
New message indication
The message display counter will flash when there are new answering
system messages.
If the new message alert tone is turned on, the telephone base will beep every
ten seconds when there are unreviewed messages.
Message playback
Press /PLAY/STOP to listen to messages.
Press /PLAY/STOP again to stop playback.
If you have new messages waiting, you will hear only new messages (oldest
rst). If there are no new messages, the system will play back all messages
(oldest rst).
When playback begins, the total number of messages is announced, followed
by the day and time of the rst message to be played.
Options during playback
Press VOL+/ VOL- to adjust the speaker volume.to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing. Press /REPEAT
twice to listen to the previous message.
Press X/DELETE to delete the current message. The system will advance to
the next message.
1.
2.
If the system
has less than
ve minutes of
recording time
left, the remaining
time will be
announced.
If F is ashing
in the message
window, the
memory is full.
You will have
to delete some
messages before
new ones can be
recorded.
Only old
messages can
be deleted.
Messages can
only be deleted
after they are
played.