Filter
Top Products
www.vtechphones.com
42
Problem Suggestion
Caller ID entries do not
match the numbers I need
to dial.
Although the call log entries you receive have 10 digits, (the area code plus the seven-digit number), in
some areas, you may need to dial only seven digits, or a 1 plus the seven digits, or a 1 plus the area code
plus the seven digits. You can change the number of digits that you dial or store from the call log.
While reviewing the call log, press # repeatedly to display these dialing options for local and long distance
numbers before dialing or saving the telephone number.
•
•
My cordless handset
beeps and is not
performing normally.
Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different
working electrical outlet not controlled by a wall switch.
Move the handset closer to the telephone base. It may be out of range.
Remove and re-insert the battery.
Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and plug it back
in again. Allow up to one minute for the handset and the telephone base to synchronize.
Other electronic products can cause interference to your cordless telephone. Try installing your telephone
as far away from these electronic devices as possible: wireless routers, radios, radio towers, pager towers,
cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and
other cordless telephones.
•
•
•
•
•
Troubleshooting