Filter
Top Products
6
Getting Started
Before You Install
1. Choose a location for the base near an electrical outlet and a
telephone jack. This phone requires a modular telephone jack and a stan-
dard electrical outlet (110v AC) not controlled by a wall switch.
2. Install the handset battery. Use only the provided VTech battery, or
equivalent.
Installation
a
c
a). Align the two holes in the plug with the socket pins, then snap the plug into
place.
b). Place the battery in the compartment with the wires in the lower right
corner. Angle the top of the battery under the top claws first, then snap the
bottom of the pack in. Place the wires under the guide, located below the
battery.
c). Replace cover by sliding it up into place.
d). If the battery is not already charged, please the handset in its base when
not in use to ensure maximum daily performance.