Filter
Top Products
3
Package Contents
USR9600 USB Phone Installation Guide
Installation CD-ROM
Physical Features:
1. LEFT and RIGHT: Use these buttons to switch
between the tabs of the Skype software
2. SEND: Press this button to place a call.
3. 0-9: Use these numbers to enter a telephone num-
ber or to enter a speed dial entry.
4. UP and DOWN: Use these buttons to scroll through
the list of contact entries and calls in the Skype soft-
ware.
5. END: Press this button to end a call or to cancel an
action.
6. CLEAR: Press this button to clear any numbers you
have entered for a call
7. #: You can press this button repeatedly to cycle
through the various ringtones.
USB Phone Installation
Prepare for Installation
Attention: Skype is not a telephony replacement service. Any VoIP service used in con-
junction with the USB Internet Phone cannot be used for calls to emergency services or
emergency telephone numbers (311, 911, 112, 999, etc.). Use a landline telephone for calls
to emergency services, such as police, fire, or ambulance.
Note: It is important that you have your serial number written down before you install the
USB Phone. You can find your serial number on the bottom label of the USB Phone. If you
ever need to call our Technical Support department, you will need this number to receive
assistance.
Note: Be sure to find out what letter your CD-ROM drives uses before you begin installing
your new product. You will need to know this to properly install your software.
Model Number Serial Number
USR9600
3
6
2
5
4
1
7