Getting started
Installation options
Tabletop mount
Wall mount
NOTE: The mounting bracket must be used for both tabletop use and wall
mounting positions.
Telephone outlet mounting
plate with mounting studs.
1. To remove the bracket, hold the
telephone base in both hands, press
the two bracket tabs and lift the
bracket away from slots
and .
2. Rotate the bracket to the wall mount-
ing position, insert the tabs of the
bracket into slots
and on the
telephone base, then press the other
bracket tabs into slots
and as
shown below.
Wall mounting
The telephone base comes with the bracket mounted for tabletop use. If wall
mounting is desired, a telephone outlet wall mounting plate with mounting studs is
required. This mounting plate with studs may be available for purchase from many
hardware or consumer electronics retailers and may require professional installation.
6