Filter
Top Products
20
Switching the Answer Machine On/Off
1. To turn the Answering System on,
press
answer.
A tone sounds, and the current outgoing
message plays on the Base Unit speaker
and the Message Counter LED turns on. A
second tone sounds to indicate the unit is
ready to answer calls.
2. To turn the Answering System off, press
answer again. A tone sounds and the
Message Counter LED turns off.
Setting the Clock
The clock in your XSA660/650 Answering
System starts when power is applied to the
Base Unit. Follow these steps to set the clock to
the correct time.
1. Press and hold the
clock button until a
beep tone is heard and the day is
announced.
2. Press
skip or repeat until the correct day
is announced.
3. Press
clock again. Press skip or repeat
until the correct hour is announced.
4. Press
clock again. Press skip or repeat
until the correct minute is announced.
5. Press
clock again. Press skip or repeat to
select AM [
-
A] or PM [
-
P].
6. Press
clock to return to Standby.
The selected time and day is announced
For example, to set Tuesday at 3.10AM:
Press and hold
clock then “Sunday” will be
announced.
Press
skip x 2 times, “Tuesday”, will be announced.
Press
clock then skip 4 times “three, will be announced.
Press
clock then skip 11 times “ten”, will be announced.
Press
clock then skip 1 time “AM”, will be announced.
Press
clock to finish, the complete time and day will be announced.
pin
mic
clock
repeat ogm memo skip
answer page
▼
▼
▼
▼
▼
USING
YOUR ANSWERING SYSTEM
When the Message Counter
LED flashes, you have
unread new messages.
Day of the Week Display
Sunday
-
0
Monday
-
I
Tuesday
-
2
Wednesday
-
3
Thursday
-
4
Friday
-
5
Saturday
-
6
pin
mic
clock
repeat ogm memo skip
answer page
▼
▼
▼
▼
▼