Filter
Top Products
10
AC
Adaptor
Line in
From
Telephone
Jack
3
5
4
8
10
9
6
2
7
Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the phone directly on a
wall. Before mounting your cordless telephone, consider the following:
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of the base and
handset; otherwise, damage to the unit could result.
Use #10 screws with anchoring devices suitable for the wall material where the
base will be placed.
1. Insert the screws, with their appropriate anchoring devices,
100mm apart. Allow 5mm between the wall and screw
heads for mounting the phone.
2. Fit the Wall Mounting Adaptor to the telephone Base.
3. Plug the AC adaptor into the base.
4. Place the AC adaptor cord inside the left molded channel
cord holder.
5. Plug one end of the long telephone cord into the TEL
LINE jack on the base.
6. Place the telephone cord into the right molded channel cord holder.
7. Place the base on the screws and push down until it’s firmly seated.
8. Plug the other end of the telephone line into the telephone wall jack.
(Remember; the phone must be fully charged before you can use it.)
9. Plug the AC adaptor into a standard
240V AC wall outlet.
10. Fully extend the antenna on the base.
Use only the AC adaptor that
came with the phone.
1